Raymarine i70s and ALPHA instruments and their accessories. - NavSystems https://www.navsystems.ee/en/product-category/instruments/i70_alpha/ Raymarine chartplotter, autopilot, tiller pilot, wheel pilot, radar, AIS, VHF, Smart Wind Mon, 12 Oct 2026 08:18:00 +0000 en-GB per hour 1 https://www.navsystems.ee/wp-content/uploads/2026/08/cropped-NavSystems-web-icon-0003969-32x32.png Raymarine i70s and ALPHA instruments and their accessories. - NavSystems https://www.navsystems.ee/en/product-category/instruments/i70_alpha/ 32 32 238308716 TA125, Wind Transmitter Battery Pack and Seal https://www.navsystems.ee/en/product/ta125-wind-transmitter-battery-pack-and-seal/ Mon, 12 Oct 2026 07:05:58 +0000 https://www.navsystems.ee/?post_type=product&p=14474 TA125 is a new battery kit for the Raymarine T120 wireless wind transducer.

The kit contains everything needed to replace the T120 wind transducer battery: a seal, cover glass, new sticker, battery and tool.

The post TA125, Wind Transmitter Battery Pack and Seal appeared first on NavSystems.

]]> TA125 is the replacement battery kit for the Raymarine T120 wireless wind transducer.

The kit includes everything needed to replace the T120 wind sensor battery, seal, cover glass, new sticker, battery and tool.

The post TA125, Wind Transmitter Battery Pack and Seal appeared first on NavSystems.

]]> 14474 TA100 Wireless Wind Vane Repair Kit https://www.navsystems.ee/en/product/raymarine-ta100-wind-vane-repair-kit/ Mon, 12 Oct 2026 04:22:08 +0000 https://www.navsystems.ee/?post_type=product&p=14472 TA100 is a repair kit for the vane of the Raymarine T120 Wireless wind transducer.

The TA100 includes the vane and mounting accessories for the Raymarine T120 Wireless wind transducer; bearings and shaft are not included in the kit.

The post TA100 Wireless Wind Vane Repair Kit appeared first on NavSystems.

]]> TA100 is the repair kit for the vane of the Raymarine T120 wireless wind transducer.

TA100 includes the Raymarine T120 wireless wind transducer vane and mounting accessories; bearings and shaft are not included.

The post TA100 Wireless Wind Vane Repair Kit appeared first on NavSystems.

]]> 14472 TA101 Wireless Wind Vane Replacement Cups https://www.navsystems.ee/en/product/raymarine-ta101-replacement-wind-cups/ Mon, 12 Oct 2026 03:56:03 +0000 https://www.navsystems.ee/?post_type=product&p=14469 TA101 is the Raymarine T120 wireless wind transducer speed cup assembly.

The post TA101 Wireless Wind Vane Replacement Cups appeared first on NavSystems.

]]> TA101 is the Raymarine T120 wireless wind transducer speed cup assembly.

The post TA101 Wireless Wind Vane Replacement Cups appeared first on NavSystems.

]]> 14469 RSW Smart Wind Anemometer Mounting Plate https://www.navsystems.ee/en/product/rsw-smart-wind-wind-sensor-mounting-plate/ Fri, 03 Jul 2026 08:09:08 +0000 https://raymarine.ee/?post_type=product&p=13421 The RSW wind transducer mounting plate is a necessary spare part if the original has broken. The RSW wind transducer must always be firmly attached and the transducer nut tightened with the included HEX key. The Raymarine RSW Wired Smart Wind transducer is a professional-grade wind transducer that offers highly accurate and calibrated wind speed and direction readings.

The post RSW Smart Wind Tuuleanduri kinnitusplaat appeared first on NavSystems.

]]> Raymarine RSW Smart Wind sensor mounting plate. 

The RSW wind transducer mounting plate is a necessary spare part if the original has broken. The RSW wind transducer must always be firmly attached and the transducer nut tightened with the included HEX key. The Raymarine RSW Wired Smart Wind transducer is a professional-grade wind transducer that offers highly accurate and calibrated wind speed and direction readings.

Instructions:

Download Raymarine RSW Wind Installation Guide

The post RSW Smart Wind Tuuleanduri kinnitusplaat appeared first on NavSystems.

]]> 13421 DST800, DST810 stainless steel transducer https://www.navsystems.ee/en/product/dst800-dst810-stainless-steel-thru-hull/ Tue, 30 Jun 2026 09:00:54 +0000 https://raymarine.ee/?post_type=product&p=13390 Low-profile through-hull fitting made of stainless steel. This fitting is needed when a through-hull sensor needs to be installed on a wooden-hulled vessel. The stainless steel fitting is suitable for Airmar sensors: DT800, DST800, UST850, UDST800 and the new DST810 and DST900 sensors. Be sure to also consult the manuals for this product and contact our specialist if you have any questions.

The post DST800, DST810 roostevaba läbiviik appeared first on NavSystems.

]]> Low-profile stainless steel hull fitting. 

This penetration fitting is needed when a through-hull sensor needs to be installed on a wooden-hulled boat.

The stainless steel transducer is suitable for Airmar transducers: DT800, DST800, UST850, UDST800, and the new DST810 and DST900 transducers.

Instructions:

Download DST800 and DST810 sensors Installation guide

The post DST800, DST810 roostevaba läbiviik appeared first on NavSystems.

]]> 13390 Alpha Performance Display wall mount https://www.navsystems.ee/en/product/alpha-performance-display-mount/ Sat, 06 Jun 2026 06:25:59 +0000 https://raymarine.ee/?post_type=product&p=12262 So that the whole team can monitor the Alpha Performance instruments in any situation, it would be sensible to place them in the cockpit near the cabin door or, if possible, on the mast. When mounting on the mast, various mast brackets are a great help. It is possible to choose between 2 different sizes, 7" and 9", and three different layouts, making a total of 6 different mast brackets. The options are: single vertical, single horizontal, dual horizontal. Be sure to also check the product manuals and consult our specialist if you have any questions.

Select the option that suits you from the drop-down menu.

The post Alpha Performance Display mastikinnitus appeared first on NavSystems.

]]> Raymarine Alpha Performance Display mast bracket

Alpha Performance Displays are the most versatile navigation data displays. High-visibility touch screens with wide viewing angles ensure excellent visibility from anywhere on board. Alpha's extensive range of data pages and widgets ensures quick and easy display of sailing, navigation, and engine data. Alpha Performance Displays are remotely controlled from Axiom series chartplotters.

For the entire team to be able to monitor the Alpha Performance instruments in every situation, it would be sensible to place them in the cockpit near the cabin door or, if possible, on the mast. When installing on the mast, various mast mounts are a good aid. There is a choice of two different sizes, 7″ and 9″, and three different layouts, making a total of 6 different mast mounts. The options are: single vertical, single horizontal, twin horizontal. The mast mount leaves a sufficient gap between the mast and the Alpha displays to accommodate the lines on top of the mast. Alpha Performance display mast mounts are made of aluminium and coated with black powder paint.

Instructions:

Download Alpha Performance Display Installation guide

Download the Alpha Performance Display Mast Bracket Installation guide

The post Alpha Performance Display mastikinnitus appeared first on NavSystems.

]]> 12262 Alpha Performance Display Daisy Chain cable 1 m https://www.navsystems.ee/en/product/alpha-performance-display-daisy-chain-cable-1m/ Sun, 17 May 2026 05:27:57 +0000 https://raymarine.ee/?post_type=product&p=11769 For sequential installation of Alpha Performance screens, Daisy Chain cables are required, which go from the first screen to the next and so on. For Alpha screens located next to or above each other in the same double mounting bracket, it is sufficient 0.3 m Daisy Chain cable. For recessed installation with a larger gap, or separate mast brackets installed with gaps, a 1 m Daisy Chain cable should be chosen.

To begin installing Alpha displays, you will also need at least one Alpha Performance Display Power and RayNet cables. From the first screen, a daisy chain cable goes to the next one. Up to 4 Alpha screens can be connected in a daisy chain. Before starting the installation, be sure to read the Alpha Performance Display manuals and consult our specialist if necessary.

The post Alpha Performance Display Daisy Chain cable 1 m appeared first on NavSystems.

]]> For sequential installation of Alpha Performance screens, Daisy Chain cables are required, which go from the first screen to the next and so on. For Alpha screens located next to or above each other in the same double mounting bracket, it is sufficient 0.3 m Daisy Chain For recessed installations with a larger gap or for mast consoles installed separately and with gaps, a 1m Daisy Chain cable should be selected.

To start installing Alpha screens, you will also need at least one Alpha Performance Display Power and RayNet cables. The next screen is connected from the first screen using a Daisy Chain cable. Up to 4 Alpha screens can be connected in a daisy chain. Select the cable length according to your needs; lengths of 1 m, 3 m, 5 m, and 10 m are available. If the RayNet connection needs to be extended later, a RayNet M – RayNet M adapter cable must be used. A80162. You can then proceed with a standard RayNet F-RayNet F cable. In this case, the power supply must be connected where the Alpha Performance Display Power and RayNet cable ended.

The Alpha Performance Display has a nominal voltage of 12-24 V DC and an actual operating voltage range of 10.8 V to 32 V DC. Thanks to this, Alpha screens can be easily connected to both 12 V and larger consoles' 24 V DC systems.

Technical specifications by model:

  • Power requirement in a 12V system The Alpha 7″ has a rated current of 0.84 A and the Alpha 9″ has a rated current of 1.02 A.
  • Power consumption in a 24V system: The Alpha 7″ has a rated current of 0.43 A and the Alpha 9″ has a rated current of 0.52 A.
  • Maximum output 10 W (7-inch) or 12 W (9-inch).
  • Recommended protection: 8.00. 

 

Instructions:

Download Alpha Performance Display Installation guide

Download the Alpha Performance Display Mast Bracket Installation guide

The post Alpha Performance Display Daisy Chain cable 1 m appeared first on NavSystems.

]]> 11769 Alpha Performance Display Daisy Chain cable 0.3 m https://www.navsystems.ee/en/product/alpha-performance-display-daisy-chain-cable-0-3m/ Sun, 17 May 2026 05:14:07 +0000 https://raymarine.ee/?post_type=product&p=11765 For sequential installation of Alpha Performance screens, Daisy Chain cables are required, which connect from the first screen to the next, and so on. For Alpha screens placed side-by-side or one above the other in the same Double mounting bracket, a 0.3m Daisy Chain cable is sufficient. For recessed installations with a larger gap or for mast brackets installed separately and spaced apart, you should choose 1m Daisy Chain cable.

To begin installing Alpha screens, you will also need at least one Alpha Performance Display Power and RayNet cables. From the first screen, a daisy chain cable goes to the next one. Up to 4 Alpha screens can be connected in a daisy chain. Before starting the installation, be sure to read the Alpha Performance Display manuals and consult our specialist if necessary.

The post Alpha Performance Display Daisy Chain cable 0.3 m appeared first on NavSystems.

]]> For sequential installation of Alpha Performance screens, Daisy Chain cables are required, which connect from the first screen to the next, and so on. For Alpha screens placed side-by-side or one above the other in the same Double mounting bracket, a 0.3m Daisy Chain cable is sufficient. For recessed installations with a larger gap or for mast brackets installed separately and spaced apart, you should choose 1m Daisy Chain cable.

To begin installing Alpha screens, you will also need at least one Alpha Performance Display. Power and RayNet cables. The next screen is connected from the first screen using a Daisy Chain cable. Up to 4 Alpha screens can be connected in a daisy chain. Select the cable length according to your needs; lengths of 1 m, 3 m, 5 m, and 10 m are available. If the RayNet connection needs to be extended later, a RayNet M – RayNet M adapter cable must be used. A80162. You can then proceed with a standard RayNet F-RayNet F cable. In this case, the power supply must be connected where the Alpha Performance Display Power and RayNet cable ended.

The Alpha Performance Display has a nominal voltage of 12-24 V DC and an actual operating voltage range of 10.8 V to 32 V DC. Thanks to this, Alpha screens can be easily connected to both 12 V and larger consoles' 24 V DC systems.

Technical specifications by model:

  • Power requirement in a 12V system The Alpha 7″ has a rated current of 0.84 A and the Alpha 9″ has a rated current of 1.02 A.
  • Power consumption in a 24V system: The Alpha 7″ has a rated current of 0.43 A and the Alpha 9″ has a rated current of 0.52 A.
  • Maximum output 10 W (7-inch) or 12 W (9-inch).
  • Recommended protection: 8.00. 

 

Instructions:

Download Alpha Performance Display Installation guide

Download the Alpha Performance Display Mast Bracket Installation guide

The post Alpha Performance Display Daisy Chain cable 0.3 m appeared first on NavSystems.

]]> 11765 Alpha Performance Display Power & RayNet cable 10 m https://www.navsystems.ee/en/product/alpha-performance-display-power-raynet-cable-10-m/ Sun, 17 May 2026 04:58:52 +0000 https://raymarine.ee/?post_type=product&p=11764 To start installing Alpha displays, you will need at least one Alpha Performance Display Power and RayNet cable. From the first display to the next, a Daisy Chain cable is then used. Up to 4 Alpha displays can be connected in a daisy chain. Choose the cable length as needed; lengths of 1 m, 3 m, 5 m and 10 m are available. If the RayNet connection needs to be extended later, a RayNet M to RayNet M adapter cable must be used. A80162. You can then proceed using a standard RayNet F-RayNet F cable. In this case, the power supply must be connected where the Alpha Performance Display Power and the RayNet cable ended. Before starting the installation, be sure to read the Alpha Performance Display manuals and consult our specialist if necessary.

The post Alpha Performance Display Power & RayNet cable 10 m appeared first on NavSystems.

]]> To begin installing Alpha displays, you will need at least one Alpha Performance Display Power and RayNet cable. Following this, a Daisy Chain cable will be used from the first display to the next. Up to 4 Alpha displays can be connected in a Daisy Chain. Select the cable length according to your needs; lengths of 1m, 3m, 5m, and 10m are available. If the RayNet connection needs to be extended later, a RayNet M to RayNet M adapter cable should be used. A80162. You can then proceed with a standard RayNet F-RayNet F cable. In this case, the power supply must be connected where the Alpha Performance Display Power and RayNet cable ended.

The Alpha Performance Display has a nominal voltage of 12-24 V DC and an actual operating voltage range of 10.8 V to 32 V DC. Thanks to this, Alpha screens can be easily connected to both 12 V and larger consoles' 24 V DC systems.

Technical specifications by model:

  • Power requirement in a 12V system The Alpha 7″ has a rated current of 0.84 A and the Alpha 9″ has a rated current of 1.02 A.
  • Power consumption in a 24V system: The Alpha 7″ has a rated current of 0.43 A and the Alpha 9″ has a rated current of 0.52 A.
  • Maximum output 10 W (7-inch) or 12 W (9-inch).
  • Recommended protection: 8.00. 

 

Instructions:

Download Alpha Performance Display Installation guide

Download the Alpha Performance Display Mast Bracket Installation guide

The post Alpha Performance Display Power & RayNet cable 10 m appeared first on NavSystems.

]]> 11764 Alpha Performance Display Power & RayNet cable 5 m https://www.navsystems.ee/en/product/alpha-performance-display-power-raynet-cable-5-m/ Sun, 17 May 2026 04:56:56 +0000 https://raymarine.ee/?post_type=product&p=11763 To start installing Alpha displays, you will need at least one Alpha Performance Display Power and RayNet cable. From the first display to the next, a Daisy Chain cable is then used. Up to 4 Alpha displays can be connected in a daisy chain. Choose the cable length as needed; lengths of 1 m, 3 m, 5 m and 10 m are available. If the RayNet connection needs to be extended later, a RayNet M to RayNet M adapter cable must be used. A80162. You can then proceed using a standard RayNet F-RayNet F cable. In this case, the power supply must be connected where the Alpha Performance Display Power and the RayNet cable ended. Before starting the installation, be sure to read the Alpha Performance Display manuals and consult our specialist if necessary.

The post Alpha Performance Display Power & RayNet cable 5 m appeared first on NavSystems.

]]> To begin installing Alpha displays, you will need at least one Alpha Performance Display Power and RayNet cable. Following this, a Daisy Chain cable will be used from the first display to the next. Up to 4 Alpha displays can be connected in a Daisy Chain. Select the cable length according to your needs; lengths of 1m, 3m, 5m, and 10m are available. If the RayNet connection needs to be extended later, a RayNet M to RayNet M adapter cable should be used. A80162. You can then proceed with a standard RayNet F-RayNet F cable. In this case, the power supply must be connected where the Alpha Performance Display Power and RayNet cable ended.

The Alpha Performance Display has a nominal voltage of 12-24 V DC and an actual operating voltage range of 10.8 V to 32 V DC. Thanks to this, Alpha screens can be easily connected to both 12 V and larger consoles' 24 V DC systems.

Technical specifications by model:

  • Power requirement in a 12V system The Alpha 7″ has a rated current of 0.84 A and the Alpha 9″ has a rated current of 1.02 A.
  • Power consumption in a 24V system: The Alpha 7″ has a rated current of 0.43 A and the Alpha 9″ has a rated current of 0.52 A.
  • Maximum output 10 W (7-inch) or 12 W (9-inch).
  • Recommended protection: 8.00. 

 

Instructions:

Download Alpha Performance Display Installation guide

Download the Alpha Performance Display Mast Bracket Installation guide

The post Alpha Performance Display Power & RayNet cable 5 m appeared first on NavSystems.

]]> 11763