• Genuine spare part: Guaranteed compatibility and precision direct from the manufacturer (Raymarine).
• Simple repair: Allows the wind speed and direction measurement to be quickly restored without running a new cable up the mast.
• Compatibility Suitable for systems where the Rotavecta transducer is connected to i40, iTC-5 POD interface, ST40, ST60 or ST60+ instruments. 

The post Raymarine Rotavecta anduripea Q113 appeared first on NavSystems.

The Raymarine i60 wind instrument is a gem for lovers of analogue dial displays. The kit includes an i60 wind instrument that displays data clearly and accurately. The i60 wind instrument can be used as a second display on an existing network or as a completely standalone wind instrument, in which case a boat speed sensor and wind sensor are also required. The i60 is well-suited as a replacement for the old ST60 Wind. If you wish to build a completely new i60 system, you might consider i60 and i50 Tridata Packs A weather station that contains everything necessary for viewing wind, speed, depth and temperature.

• Large numbers
• Red backlight for better visibility
• SeaTalk1 ja SeaTalk^No Connectivity
• NMEA2000 (compatible) interface
• Anduri ühendus
• 110 mm x 115 mm – same dimensions as the Raymarine ST60+ instrument series
• Low power consumption
• Supports multiple data sources, while eliminating potential data silos
• Mounts from the front and covers the old ST60+ opening
• The set includes a black and grey frame.

The post i60 Wind Instrument appeared first on NavSystems.

The Raymarine i60 Wind System includes an i60 instrument and a Wind Vane transducer with a 30m mast cable. This is sufficient to view APP Wind information only. The system includes an i60 Wind instrument that displays data clearly and accurately. The included short-arm Wind Vane transducer connects directly to the i60 instrument via the supplied 30-metre mast cable. If you plan to use this system as a completely standalone unit, be sure to order STNG Power Cable.

If you want to see True Wind information, you could consider i60 and i50 Tridata Packs The ultimate package containing everything needed to create a wind, speed, depth, and temperature system.

• Large numbers
• Red backlight for better visibility
• SeaTalk1 ja SeaTalk^No Connectivity
• NMEA2000 (compatible) interface
• Anduri ühendus
• 30m mast cable and WindVane wind sensor are included.
• 110 mm x 115 mm – same dimensions as the Raymarine ST60+ instrument series
• Low power consumption
• Supports multiple data sources, while eliminating potential data silos
• Mounts from the front and covers the old ST60+ opening
• The set includes a black and grey frame.

The post i60 Wind Pack appeared first on NavSystems.

The Raymarine Rotavecta wind transducer repair kit contains all the necessary components to restore the accurate operation of the wind transducer after damage. The kit includes the wind speed cups and a fixing screw. NB! The Raymarine Rotavecta Z195 wind transducer cups are not suitable for the ST50 wind transducer, the newer and more rounded ST60 Wind Vane transducer, or the Raymarine RSW wind transducer!

Contents of the kit:

• Wind speed sensors

Compatible with the following Raymarine equipment:

• Rotavecta wind sensor Z195

Key features

• Original Raymarine spare part

• Ensures the accurate and reliable operation of the wind sensor

• Simple and quick replacement for an existing sensor

• Durable and marine-environmentally suitable design

The post Raymarine Rotavecta tuuleanduri kulbid appeared first on NavSystems.

The Raymarine ST50 Wind Vane spare parts kit contains all the necessary components to restore the accurate operation of the wind transducer following wear or damage. The kit includes wind speed cups, a wind direction vane and the required fixing screws. NB! The ST50 wind transducer repair kit with square cups is not suitable for the newer, more rounded ST60 Wind Vane transducer, the Raymarine RSW wind transducer or the Rotavecta Z195 wind transducer!

Contents of the kit:

• Wind speed sensors

• Windward

• Fixing screws

Compatible with the following Raymarine equipment:

• ST50 Wind Vane anemometer

Key features

• Genuine Raymarine spare part kit

• Ensures the accurate and reliable operation of the wind sensor

• A simple and quick solution for minor repairs to the ST50 wind sensor

• Durable and marine-environmentally suitable design

The post Raymarine ST50 tuuleanduri kulbid ja suunalaba appeared first on NavSystems.

This repair kit with paddlewheel is suitable for all Raymarine ST800 – P120 speed and temperature sensors. The paddlewheel is suitable for the following Airmar housings: plastic 33-340-02, bronze 33-340-01, and stainless steel 33-451-01. If you do not know which sensor you have, but you are sure that it is an Airmar sensor, you can visually tell the difference by the fact that the ST800 sensor has the speed roller exactly in the middle, while the DST800's is offset. The roller itself makes no difference, but the shaft is of different lengths.

The set includes:

• Speed ramp

• Shaft

• Clap

• O-rings

The post ST800/P120 anduri remondikomplekt (koos klapiga) appeared first on NavSystems.

SeaTalk1 cables are needed if you wish to connect a SeaTalk1 device to an existing SeaTalk1 network. If there are no free slots on the network, you will likely also need a SeaTalk1 3-Way Junction box with three identical SeaTalk1 ports. This is a useful aid if a new SeaTalk1 network does not have enough free ports.

This product is also well suited ST1000+ and ST2000+ to integrate Raymarine Element directly with the old SeaTalk network and through SeaTalk1-STNG converter with the new STNG (NMEA2000) network.

The post Raymarine SeaTalk1 kaabel 1 m appeared first on NavSystems.

The SeaTalk1 3-Way Junction Box is a three-socket SeaTalk1 connection accessory, with all three sockets being identical. It is a useful aid when you need to expand an old SeaTalk1 network with some instrument or converter, but there are no free sockets. In this case, you will probably also need at least one SeaTalk1 cable. D284.

The post Raymarine SeaTalk1 3-Way jagaja appeared first on NavSystems.

The Raymarine 50-metre mast cable for wind vanes enables the wind transducer to be connected securely and reliably from the masthead down to the instruments. The cable is equipped with a special masthead fitting featuring a socket and thread suitable for the transducer. It is suitable for use with Raymarine wind transducers, offering reliable data transmission even in the most demanding sailing conditions.

Features:

• 50 metres of quality mast cable

• Sensor mounting mast and connector included

• Suitable for Raymarine Wind Vane wind sensors

• Durable construction with weather and UV protection

• Intended to ensure a long-term and secure connection

The post Raymarine Wind Vane mast Cable 50m and Connector appeared first on NavSystems.

This speed wheel is suitable for all Raymarine DST800 speed, depth and temperature sensors. If you don't know which sensor you have, but you are sure it is an AIRMAR sensor, then visually you can tell the difference by the fact that the ST800 sensor has the speed wheel exactly in the middle and the DST800 has it offset. There is no difference in the wheel itself, but the shaft is of different lengths.

The set includes:

• Speed ramp

• Shaft

• O-rings

The post DST800 anduri remondikomplekt appeared first on NavSystems.