STNG In-Line terminator

Raymarine STNG In-Line terminator is a very important part of the STNG (NMEA 2000) network. The STNG network must begin and end with a terminator, and there must be strictly only 2 terminators per network. The In-Line terminator is for when the network begins or ends with a drop cable; the In-Line terminator is connected to the end of the backbone cable and a spur cable is connected to its end, which goes directly to the device. When the network is ready, there cannot be any empty blue sockets in the STNG network. All cables and connectors are colour-coded; blue and white cables cannot be connected to the wrong socket of the STNG connector, as the pin arrangement is different. Before using the product, familiarise yourself with the operating principle of the STNG (NMEA 2000) network. NB! The blue and white nuts of the STNG connectors should only be turned a quarter of a turn. Corresponding markings are indicated on the product. Be sure to also check out this product instructions and in case of questions, consult our specialist.